Product Introduction for Southeast Asia, India & Russia
Product: SV300 Side Grip Hydraulic Vibratory Pile Driver
Integrated Keywords: Side grip pile driver Made In China, low headroom operation capability, compact structure confined spaces, dual pump flow merging system,
full top tool change system.
Overview
The SV300 is a medium‑duty Side grip pile driver Made In China,
purpose‑built for 25–32 ton excavators. With true low headroom
operation capability and compact structure confined spaces, it
excels in factory extensions, bridge underpinning, and urban
utility projects where access is restricted. The dual pump flow
merging system ensures consistent hydraulic power even on
excavators with moderate auxiliary flow, while the full top tool
change system allows rapid swapping between steel sheet piles,
H‑beams, and circular pipes – all without leaving the cab. Designed
for contractors in Southeast Asia, India, and Russia, the SV300
delivers the perfect balance of power, portability, and
productivity.
Key Features
- Low headroom operation capability
The SV300 features both side clamp (385 kN) and bottom clamp (490
kN). This low headroom operation capability allows pile driving and
extraction in vertical clearances as low as 3.5 meters. Work
confidently under low bridges, inside warehouse mezzanines, or
beneath power lines – places where conventional piling rigs cannot
go. - Compact structure confined spaces
Measuring only 1343mm (L) × 1230mm (W) × 2923mm (H) and weighing
3150 kg, the compact structure confined spaces engineering lets the
SV300 fit through standard industrial doorways and between pillar
spacings of 3.2 meters. No expensive site modifications or special
transport permits – simply drive your 25‑32 ton excavator into the
tightest job sites. - Dual pump flow merging system
Many 25–32 ton excavators have auxiliary flow below the required
220–280 L/min. The dual pump flow merging system combines two
separate pump circuits into one high‑flow stream, ensuring the
SV300 receives full hydraulic power (up to 280 L/min). This is a
critical advantage for fleet owners in India and Russia who want to
maximize existing equipment without upgrading to larger machines. - Full top tool change system
The full top tool change system allows the operator to swap clamp
jaws in under 10 minutes – no crane, no special tools. One SV300
can handle U‑type sheet piles, Z‑type sheet piles, H‑beams (up to
350 mm flange), and circular pipes (up to 800 mm diameter) on the
same day. This flexibility reduces equipment costs and keeps
projects moving. - High performance vibratory power
With an eccentric moment of 5.6 kgm and centrifugal force of 558
kN, the SV300 drives piles efficiently through soft clay, sandy
loam, and dense gravel. Frequency is adjustable from 2300 to 3000
rpm, allowing operators to tune performance for different soil
layers.
Technical Parameters (SV300)
| Parameter | Value |
|---|
| Eccentric moment | 5.6 kgm |
| Centrifugal force | 558 kN |
| Frequency range | 2300 – 3000 rpm |
| Side clamp force | 385 kN |
| Bottom clamp force | 490 kN |
| Operating pressure | 32 MPa |
| Flow requirement | 220 – 280 L/min |
| Rotation / tilt angle | 360° / ±30° |
| Dimensions (L×W×H) | 1343×1230×2923 mm |
| Weight (incl. connector & clamp) | 3150 kg |
| Suitable excavator | 25 – 32 tons |
Advantages for Southeast Asia, India & Russia
Southeast Asia (tight urban sites, low bridges, high humidity)
Low headroom operation capability enables piling under elevated MRT
tracks and inside basement carparks.
Compact structure confined spaces allows access to narrow alleyways
in Bangkok, Jakarta, and Manila.
Full top tool change system lets you switch between sheet piles
(for flood walls) and H‑beams (for building foundations) in
minutes.
Dual pump flow merging system works perfectly with common 25‑30 ton excavators from Hitachi,
Kobelco, and Komatsu.
India (mixed excavator fleets, cost‑sensitive, fast‑growing
infrastructure)
Dual pump flow merging system makes the SV300 compatible with older
25‑32 ton excavators (JCB, L&T, Sany) without expensive
hydraulic upgrades.
Low headroom operation capability is essential for bridge repair
projects where clearance is limited.
Compact structure confined spaces reduces site preparation costs –
no need to widen access roads.
Full top tool change system saves downtime on projects with
multiple pile types.
Russia (extreme cold, remote sites, limited access)
Reliable operation down to -25°C with appropriate hydraulic oil.
Compact structure confined spaces reduces transport costs to remote
regions – more units per container.
Low headroom operation capability allows work under low viaducts
and inside industrial buildings without dismantling overhead
structures.
Full top tool change system means you only need one attachment for multiple pile types –
critical when service centres are far away.
Pile Types Supported
U‑type and Z‑type steel sheet piles (all standard profiles)
H‑beams (up to 350 mm flange width)
Circular pipe piles (up to 800 mm diameter)
FAQ
Q1: What is the minimum headroom for the SV300?
A: With low headroom operation capability using the bottom clamp,
you can work in clearances as low as 3.5 meters.
Q2: My excavator has only 200 L/min flow. Can it run the SV300?
A: Yes – the dual pump flow merging system combines two circuits
(e.g., 100+100 L/min) to reach 200 L/min. For full 558 kN force, we
recommend 220–280 L/min.
Q3: How does compact structure confined spaces benefit me?
A: The SV300’s small footprint (1230mm wide) fits through standard
doorways and between closely spaced pillars. You avoid the cost of
demolishing walls or widening access routes.
Q4: What makes the full top tool change system different from
standard jaw changes?
A: It uses spring‑loaded wedges and safety pins. One operator can
swap jaws in under 10 minutes without crane assistance – no waiting
for third‑party tools.
Q5: Can the SV300 handle concrete piles?
A: No – it is designed for steel sheet piles, H‑beams, and steel
pipe piles. For concrete piles, please ask about our hydraulic pile
breaker.
Conclusion
The SV300 is the ideal Side grip pile driver Made In China for contractors who need power, precision, and flexibility in
tight spaces. Its low headroom operation capability, compact
structure confined spaces, dual pump flow merging system, and full
top tool change system deliver exceptional value for urban
infrastructure, bridge repair, and industrial projects across
Southeast Asia, India, and Russia. Contact us for a compatibility
check with your 25‑32 ton excavator.
