Introduction
The SV-300 is a Side grip pile driver Manufacturers China, built in
our ISO‑certified Suzhou factory and exported worldwide. This
machine is designed for low headroom and confined spaces, featuring
Custom low headroom operation capability – the total height (including clamp) is only 2923 mm, and we can
further reduce it for special projects. The High Quality quick tool
change system allows operators to swap between steel sheet pile
jaws, H‑beam grips, and circular pipe clamps in under 10 minutes,
using only basic hand tools. The bidirectional tilt driving head
Hot Sale model provides ±30° tilt in two directions, making it
ideal for batter piles, slope compensation, and uneven terrain.
With full 360 degree continuous rotation Factory direct supply, the
precision slewing ring enables unlimited rotation without hose
twisting. The SV‑300 delivers 558 kN centrifugal force, frequency
range 2300–3000 rpm, side clamp force 385 kN, and bottom clamp
force 490 kN. One machine completes clamping, positioning, driving,
and extraction – no auxiliary equipment needed.
Key Features & Advantages (Integrating the 5 Keywords)
| Feature | Benefit for Low Headroom & Confined Space Projects |
|---|
| Custom low headroom operation capability | We offer Custom engineering – reduce total height further (to as
low as 2700 mm) for ultra‑tight sites. Standard 2923 mm already
works under 3.5 m bridge decks. Tailored to your site constraints. |
| High Quality quick tool change system | Built with hardened steel and precision pins. This High Quality
system withstands daily abuse. Change clamp jaws in minutes – no
special tools, no downtime. Includes replaceable wear plates for
extended life. |
| Bidirectional tilt driving head Hot Sale | This feature is currently Hot Sale due to its versatility. ±30°
tilt in two independent directions. Drive batter piles for
retaining walls, level on slopes, or align with pre‑drilled holes.
Robust cylinders with sealed pins. |
| Full 360 degree continuous rotation Factory | Direct from our Factory, the slewing ring offers zero backlash and
90‑ton axial pull. Unlimited rotation – position the pile at any
angle without moving the excavator. No hose twisting, no position
limits. |
| Side grip pile driver Manufacturers China | As direct Manufacturers in China, we provide factory pricing, full
customization, and rapid spare parts shipping. Our quality is
backed by German bearings and Parker motors. |
Additional specifications from the catalog (SV-300):
Eccentric moment: 5.6 kgm
Centrifugal force: 558 kN
Frequency range: 2300–3000 rpm
Side clamp force: 385 kN | Bottom clamp force: 490 kN
Working pressure: 32 MPa | Flow: 220–280 L/min
Rotation: 360° continuous | Tilt: ±30° bidirectional
Dimensions (L×W×H): 1343×1230×2923 mm
Weight (incl. connector & clamp): 3150 kg
Suitable excavator: 25–32 tons
Technical Parameters – SV-300
| Parameter | Value |
|---|
| Eccentric Moment | 5.6 kgm |
| Centrifugal Force | 558 kN |
| Frequency Range | 2300 – 3000 rpm |
| Side Clamp Force | 385 kN |
| Bottom Clamp Force | 490 kN |
| Working Pressure | 32 MPa |
| Working Flow | 220 – 280 L/min |
| Rotation Angle | 360° |
| Tilt Angle | ±30° |
| Dimensions (L×W×H) | 1343×1230×2923 mm |
| Weight (incl. connector & clamp) | 3150 kg |
| Suitable Excavator | 25 – 32 tons |
Why SV-300 for Southeast Asia, India & Russia
Southeast Asia (bridge widening, factory extensions)
Custom low headroom operation capability – adapt to low flyovers in
Bangkok and Manila.
Full 360 degree continuous rotation Factory – precise placement in
tight urban zones.
Side grip pile driver Manufacturers China – fast delivery to
Vietnam, Indonesia, Philippines.
India (metro rail, flyover under‑deck work)
Bidirectional tilt driving head Hot Sale – compensate for uneven
ground on approach roads.
High Quality quick tool change system – switch between sheet piles
and H‑beams on same site.
Custom low headroom – work under existing low bridges without
stopping traffic.
Russia (industrial retrofits, winter enclosures)
Custom low headroom – fits inside heated temporary shelters with
limited height.
High Quality components with low‑temperature seals operate down to
-30°C.
Full 360 degree rotation – reliable slewing with cold‑weather
grease.
FAQ (Frequently Asked Questions)
Q1: What does Custom low headroom operation capability mean?
A: Standard SV‑300 height is 2923 mm. But we can Custom engineer a
shorter version (down to 2700 mm) for extremely tight sites – such
as under old bridges with only 3.2 m clearance. Contact us with
your site measurements.
Q2: Why is the quick tool change system considered High Quality?
A: We use induction‑hardened steel for the clamp seat interfaces
and precision‑ground locking pins. The system has passed 10,000
cycle tests without wear. That’s High Quality you can rely on.
Q3: Is the bidirectional tilt driving head really Hot Sale?
A: Yes – this feature is in high demand for slope work and
retaining walls. The Hot Sale model includes reinforced cylinders
and dust‑proof seals. Many contractors have switched to this
configuration.
Q4: What does full 360 degree continuous rotation Factory mean for
me?
A: It means the slewing ring is produced in our own Factory, giving
us strict quality control. You get a zero‑backlash,
maintenance‑free rotation unit. No third‑party parts, no hidden
costs.
Q5: Why choose Side grip pile driver Manufacturers China over
traders?
A: As Manufacturers China, we control every step – from steel
cutting to final assembly. You get factory‑direct pricing, faster
customization, and genuine spare parts. No middlemen markups.
Q6: What excavator size is required?
A: 25–32 ton excavators such as Komatsu PC200‑300, Hitachi
ZX200‑300, Sany SY205‑305, Hyundai R250‑320, Doosan DX225‑300, etc.
Flow: 220–280 L/min at 32 MPa.
Q7: Can I get a custom color or branding?
A: Yes, as part of Custom low headroom operation capability, we
offer custom painting and decals. Minimum order quantity applies.
Q8: How does the tilt head handle uneven ground?
A: The bidirectional tilt driving head lets you level the hammer
left/right or forward/backward independently. Just adjust the tilt
from the cab – no need to level the excavator.
Q9: What is the lead time for a customized SV-300?
A: Standard unit: 15 days. Custom modifications (shorter height,
special jaws): 25–30 days. Express options available.
